Archive for the ‘Technology’ Category

Cleaning refrigeration equipment and protecting your investment

Sunday, May 16th, 2010

If you have bought a bottle cooler in the past and replaced it you will know that when it’s removed it is normally full of grime, dust and dirt at the back of the unit and underneath. In the bar environment this is quite normal and will occur in the cleanest bars.

Back bar coolers lose their efficiency when they become full of dust and grime. Because of this units fail in trade and often are replaced earlier than is necessary. The dust on the fans and condenser causes the compressor to overwork to compensate and can cause excessive overheating, in extreme circumstances this will cause fans to jam, this in turn can cause icing in the unit and it will suffer from a reduced cooling ability.

Sensible cleaning is required of all units, we would suggest the following At least every 6 months:

  • Remove all contents from the unit bottles cans etc.
  • Pull the unit out so you can easy access the rear of the unit
  • Unplug the unit
  • Hoover, out all visible back area and reachable areas below the unit
  • Also take time to Clean out the inside of the unit which also for health and hygiene reasons should be done at a regular intervals
  • Plug the unit in and push back into position, and re-stock

By following the above instructions we are sure you will get better cooling results year after year and less need to early replacement. If you need any advice on cleaning our refrigeration products please call our help line and we will be happy to advise you.

Chris Lloyd

Sales & Marketing Director

www.ukcoolermarket.co.uk

Chris.lloyd@ukcoolermarket.co.uk

0870 609 3259

The Environmental Argument for Hydrocarbon Gases

Monday, September 28th, 2009

 

As one of the first people to launch environmentally friendly refrigeration into the UK in 1996, I am bewildered that the potential of Hydro carbon technology has not been harnessed. There is a apathy in trade to ignore the environmental concerns of refrigeration when there are real options to move from conventional gases like R134A for smaller commercial equipment such a back bar coolers.

Accepting that in 1996, there were its doubters, Care 30 was used in many 10’s of thousands of unit sold in the nineties and into 2000. There were little to no risks involved both in manufacture and use in the trade, units were clearly market and could be serviced very well in trade. However, still in trade today we are clinging onto the old R134a technology, mostly due to lack of training and false safety fears regarding Hydrocarbon Gases.

UKCMP launched R600 units in 2007, and although mildly successful, failed to gain a foot hold for its value for money range that would have been expected. Constantly we were faced with customers who were happy to try the units, but wanted R134a. This took its toll on introducing our products to the market and our penetration to larger accounts. So bowing to our business needs we have now launched a Full range of R134A Units.

Although we are happy to grow our business we still consider going for the R134a gas as a retro grade step in our business and while the industry is looking for new technologies to combat this type of gas, and as long as the government gives no lead on this with legislation the chances of returning to the Hydrocarbon alternatives are bleak.

UKCMP is committed to offer both alternatives in volume to its customers any large users, can obtain R600 units from us under contract and we are happy to supply and service such stocks in trade. But our general stock will continue on R134a for trade sales and stocked products.

Chris Lloyd

Sales & Marketing Director

www.ukcoolermarket.co.uk

Chris.lloyd@ukcoolermarket.co.uk

0870 609 3259