Back bar coolers lose their efficiency when they become full of dust and grime. Because of this units fail in trade and often are replaced earlier than is necessary. The dust on the fans and condenser causes the compressor to overwork to compensate and can cause excessive overheating, in extreme circumstances this will cause fans to jam, this in turn can cause icing in the unit and it will suffer from a reduced cooling ability.

Sensible cleaning is required of all units, we would suggest the following At least every 6 months:

• Remove all contents from the unit bottles cans etc.
• Pull the unit out so you can easy access the rear of the unit
• Unplug the unit
• Hoover, out all visible back area and reachable areas below the unit
• Also take time to Clean out the inside of the unit which also for health and hygiene reasons should be done at a regular intervals
• Plug the unit in and push back into position, and re-stock

By following the above instructions we are sure you will get better cooling results year after year and less need to early replacement. If you need any advice on cleaning our refrigeration products please call our help line and we will be happy to advise you.

Chris Lloyd

Sales & Marketing Director

www.ukcoolermarket.co.uk

Chris.lloyd@ukcoolermarket.co.uk

0870 609 3259

As one of the first people to launch environmentally friendly refrigeration into the UK in 1996, I am bewildered that the potential of Hydro carbon technology has not been harnessed. There is a apathy in trade to ignore the environmental concerns of refrigeration when there are real options to move from conventional gases like R134A for smaller commercial equipment such a back bar coolers.

Accepting that in 1996, there were its doubters, Care 30 was used in many 10’s of thousands of unit sold in the nineties and into 2000. There were little to no risks involved both in manufacture and use in the trade, units were clearly market and could be serviced very well in trade. However, still in trade today we are clinging onto the old R134a technology, mostly due to lack of training and false safety fears regarding Hydrocarbon Gases.

UKCMP launched R600 units in 2007, and although mildly successful, failed to gain a foot hold for its value for money range that would have been expected. Constantly we were faced with customers who were happy to try the units, but wanted R134a. This took its toll on introducing our products to the market and our penetration to larger accounts. So bowing to our business needs we have now launched a Full range of R134A Units.

Although we are happy to grow our business we still consider going for the R134a gas as a retro grade step in our business and while the industry is looking for new technologies to combat this type of gas, and as long as the government gives no lead on this with legislation the chances of returning to the Hydrocarbon alternatives are bleak.

UKCMP is committed to offer both alternatives in volume to its customers any large users, can obtain R600 units from us under contract and we are happy to supply and service such stocks in trade. But our general stock will continue on R134a for trade sales and stocked products.

Chris Lloyd

Sales & Marketing Director

www.ukcoolermarket.co.uk

Chris.lloyd@ukcoolermarket.co.uk

0870 609 3259

UKCM Range Launch August 2009

First, can I thank you all for your support since the launch of UK Cooler Market place. We have now been trading for over three years and the business has grown strongly!

It is always our policy to move with the market and ensure that we are able to meet our customers demands, it has become evident that we need to introduce a range of cabinets using R134A as the trade seems unready at this time to embrace the R600 technology, Although we believe this is a backward step we recognise that not having R134A is hampering our progress.

With the above in mind we have dropped the R600 Orca range from our stock lists and will now produce most of our units with R134a.

The new brand is called UKCM and this will be the badge on all new Fridges. The quality, performance and specifications will be identical, other than the savings normally made using hydrocarbons.

The UKCM range will launch from the 3^rd August 2009. New brochures will be sent to you shortly and please contact me for any photos or information you may need for your web sites. Our web site should be running with new details within the next 14 days, so look out for that!

Furthermore, please keep up to date with our site, we will be adding blog posts and special deals for the autumn and the Xmas, to help you get the most from your 2009 trading periods.

We truly believe UKCM will be a great success! We can assure you of our best prices going forward and a service second to none!

Chris Lloyd

Sales & Marketing Director

www.ukcoolermarket.co.uk

Chris.lloyd@ukcoolermarket.co.uk

0870 609 3259